Introducing the
RC-OS Renaissance Charge Negative Energy Oscillator
This is an experimental product so user is fully responsible for misuse
There are no replaceable parts.
This is meant to be used with a variable power supply that is not provided.
This can be used as a universal battery charger for 1 to 48V or higher depending upon the input voltage (we cannot recommend charging lithium batteries even though it is physically possible). As explained in the video there is a limit as to how much you can push this oscillator. It will depend upon ambient temperatures and how long you run it for. Therefore, we only recommend a maximum input of 15V at 0.5 Amperes. This does not come with a power supply, but any used should be limited to that amperage and voltage. The output charging clips need to be always connected to a suitable load. A completely dead battery is not a suitable load, and you should only use this for attempting to restore such batteries at the lowest power level with very low input voltages until you see it taking a charge. We have used this charger in our company since 2005 to restore batteries over weeks and months when the other chargers could not touch them. Approximately 5% of the 20% useless batteries that could not be restored have come back using this oscillator.
The oscillator can be used in unconventional arrangements like the second and third stage process in the Selfish Circuits Loving Paths teaching. If the world came to a halt again, and parts were hard to come by, this would be one of the first things I would want to have on hand.
There will be larger versions of this in the future that also will be heater systems. Other applications will be to use with the Renaissance Solar Charge Controller as an amplifier.
To start: press the button once for less than half a second (may start on it's own when connected up and input is above 13 volts). Do not hold button down for longer than half a second.
To adjust power level: Turn knob counter-clockwise for lower power and clockwise for higher power levels.
Input: 1.5V-15V 0.6A maximum
Output to 1-48V loads.
Size: 3.5" x 3" x 1.5"
Weight: 7 oz.